Knowledge base > Installation guides > Machine

ABAX6M

The ABAX6M IoT Gateway is ideal for monitoring usage, location of all types of machines, trailers, heavy equipment, high-value mobile assets and it is designed for rapid return of investment.

It features a waterproof and rugged enclosure as well as a large backup battery if required. If you need further protection, simply add the special designed steel cage for peace of mind.

The ABAX6M enables improved operating efficiency, asset recovery, streamlined service and a maintenance platform with 3 different inputs.This is part of our IoT global network which combines asset tracking and service as well as maintenance module solutions in a single platform

GPS tracker with 3 inputs
  • 3 separate inputs for usage log
  • A flexible solution for trailers
  • Waterproof IP67
  • Battery backup
  • Real time GPS location
  • Ensure you keep your service plan
  • Recover lost assets
Specifications
  • 72x72x18,5 mm
  • 106 g
  • Operating temp: -20ºC to +60ºC
  • Battery capasity 3400mAh/12580 mWh


Installation

When installing the ABAX6M be sure to follow the instruction manual of your machine.

  • 8 hours charging time from 0-100%, delivered with a 50% charge
  • Use the 150 cm cable provided use of a different cable will interfere with the warranty of this product.
  • Updates every 60 seconds when powered and in movement
  • Sensors: Accelerometer, Gyro, GNSS and temperature

Installation details

Installation type: Wired installation 3 usage logs
Typical equipment: Heavy plant machinery (Excavators, Diggers, Generators etc.)
Estimated installation time: 20 minutes
Required tools: Soldering iron, heat-shrink kit, multimeter
Usage logging:3 seperate 0-60V analog input voltage for usages logging
Vibration approvals:Shock form: half sinus Peak acceleration: 500m/s²
Shock duration: 6ms
Number of shocks: ±10 (X,Y,Z) total =60
Test axes: 3 (±X, ±Y, ±Z)
Supply voltage:6 to 60V - M8 connector
Red wire:For permanent power
Black WireFor ground (earth)
Yellow WireFor a power source that is active when the ignition is on
White Wire For a power source that is active when the ignition is on
Blue Wire For a power source that is active when the ignition is on

Do not mount the unit under metal as it may interfere with GPS signal strength.


Cages for extra protection

The cage is custom designed and we ensure it will not interfere with the signals sent from the device. The cage will also ensure the device is prepared for extreme conditions. The cage can be mounted with one way tampering screws that will make it difficult for potential thiefs to remove.

  • Dimensions: 78,4 x 100,4 X 24.6 mm
  • Weight: 197 gr
  • 3 mm stainless steel
  • Default tolerance: 0,3 mm

Download the EU declaration pdf

EU Declaration 04.03.21